Body Piercing Sizing Master

TiSafe Sizing & Gauge Guide

Find the perfect fit for your titanium piercings. Accurate thickness, post length, and hoop diameter measurements for comfort and healthy healing.

ASTM F136 Implant Grade
Ultra-Low Nickel Content & Ultra-High Biocompatibility
Standard Imperial & Metric Scale

Visual Gauge Thickness Guide

Gauge (G) indicates the thickness of the barbell post or wire. Lower gauge numbers mean thicker jewelry.

20G
0.8 mm / 0.031"
DIAMETER: 0.8mm

Standard fashion earring & delicate nostril post thickness. Thinnest standard body jewelry gauge.

Common Placements: Standard Earlobe, Traditional Nostril Screws.
18G
1.0 mm / 0.039"
DIAMETER: 1.0mm

Ideal transitional gauge between fashion earrings and cartilage piercings. Very comfortable for refined cartilage wear.

Common Placements: Upper Earlobe, Delicate Helix, Forward Helix, Nostril.
Standard
16G
1.2 mm / 0.047"
DIAMETER: 1.2mm

The industry standard for almost all ear cartilage and facial piercings. Provides high stability with minimal migration risk.

Common Placements: Helix, Tragus, Conch, Flat, Labret, Medusa, Septum.
14G
1.6 mm / 0.063"
DIAMETER: 1.6mm

Heavier gauge designed for structural stability, tongue bars, navel curves, and industrial bars.

Common Placements: Navel / Belly, Industrial Barbell, Tongue, Nipple, Daith.

Post Length & Hoop Diameter Standards

Ensure comfortable wear by selecting the right wearable length for labret studs and inside diameter for clickers.

POST
Flat Back Labret Post Length
Measured between the base and bottom of the top attachment
6 mm 1/4"
Snug & Downsized Fit

Fully healed piercings on thinner cartilage (Helix, Tragus, Forward Helix) or thin earlobes.

8 mm 5/16"
Universal Standard Length

Most common size for healed Conch, Earlobe, Lip/Labret, and average-thickness cartilage.

10 mm 3/8"
Thicker Cartilage or Initial Healing

Thicker conch placements, initial piercings with mild swelling, or fuller lip tissue.

12 mm 1/2"
Initial Swelling Accommodation

Initial oral/lip piercings or thicker anatomy requiring extra post clearance.

Pro Piercer Downsizing Rule: Initial piercings require a longer post (8mm–10mm) to allow for natural swelling. Once healed (usually 4–8 weeks), downsize to a snug post (6mm–8mm) to prevent tilting and snagging.
RING
Clicker & Hoop Inner Diameter
Measured across the straight inside opening (ID), not the outside edge
6 mm 1/4"
Extra Tight / Petite Placement

Snug Rook, Anti-Tragus, forward helix, or very close-to-edge nostril piercings.

8 mm 5/16"
Standard Piercing Hoop Fit

Standard Septum, Nostril, Helix, Tragus, Daith, and second/third earlobe rings.

10 mm 3/8"
Medium / Deep Set Cartilage

Roomy Septum, Conch ring (close to rim), standard Lip hoop, or lobe hoop earrings.

12 mm 1/2"
Deep Conch & Statement Hoops

Deep-set Conch rings wrapping around the outer ear rim, or loose dangling lobe hoops.

How to Avoid Squeezing Cartilage: Always measure from the piercing hole to the edge of your ear or nostril. If that distance is 7mm, choose an 8mm inner diameter hoop for a natural, pain-free drape.

Placement Quick Reference Chart

Standard piercing sizing recommendations based on clinical titanium body jewelry benchmarks.

Piercing Placement Standard Gauge Recommended Post Length Recommended Hoop Inner Diameter Recommended TiSafe Style
Earlobe (Standard)Lower lobe 20G / 18G / 16G (0.8 - 1.2mm) 6 mm – 8 mm (1/4" – 5/16") 8 mm – 10 mm (5/16" – 3/8") Flat Back Stud / Seamless Clicker
Helix / FlatUpper outer ear rim 16G (1.2mm) or 18G (1.0mm) 6 mm – 8 mm (1/4" – 5/16") 8 mm – 10 mm (5/16" – 3/8") Threadless Labret / Hinged Segment
TragusCartilage flap over ear canal 16G (1.2mm) 6 mm (1/4") 6 mm – 8 mm (1/4" – 5/16") Petite Flat Back Labret
ConchCenter ear bowl 16G (1.2mm) 8 mm – 10 mm (5/16" – 3/8") 10 mm – 12 mm (3/8" – 1/2") High-Polish Labret / Wide Clicker
NostrilSide of nose 18G (1.0mm) or 20G (0.8mm) 6 mm – 7 mm (1/4") 7 mm – 8 mm (9/32" – 5/16") Micro Flat Back / Seamless Ring
SeptumNasal center cartilage divider 16G (1.2mm) N/A (Horseshoe: 8-10mm) 8 mm – 10 mm (5/16" – 3/8") Hinged Segment Clicker / Circular Barbell
Lip / Labret / MedusaOral facial piercing 16G (1.2mm) 8 mm – 10 mm (5/16" – 3/8") 8 mm – 10 mm (5/16" – 3/8") Internal Thread Flat Back Labret
Navel / BellyUpper belly button rim 14G (1.6mm) 10 mm – 11 mm (3/8" – 7/16") N/A (Curved Barbell) ASTM F136 Titanium Curved Barbell

How to Measure at Home

Accurate measurement in 3 simple steps using standard household tools.

1
Measure Existing Jewelry
Place your best-fitting jewelry on a metric millimeter ruler. Measure the straight post length between the flat back disc and the front attachment (excluding screw threads).
2
Measure Hoop Distance
For hoop rings, measure from your piercing hole straight down to the edge of your ear or nostril. Add 1mm for a comfortable fit or 2mm for a relaxed, loose aesthetic.
3
Consult a Caliper or Card
If you have digital calipers, measure the post thickness directly. If between sizes, always round up in length to prevent pressure necrosis on sensitive cartilage.

Why Precision Sizing Matters with ASTM F136 Titanium

TiSafe pieces are machined from certified Ti-6Al-4V ELI (ASTM F136) implant grade titanium. Because medical-grade titanium features ultra-low nickel content complying with EU directives and ASTM standards, pairing it with the exact anatomical length minimizes friction, reduces irritation risk, and supports rapid, healthy tissue integration.

ULTRA-HIGH BIOCOMPATIBILITY Medical Grade F136

Ready to find your perfect fit?

Explore our certified ASTM F136 implant-grade titanium jewelry with pre-configured standard sizes.